Filling preparation: loading to discharge
Start with the JB-400 batch sequence and sticky-rice filling demonstration, then inspect loading, ingredient addition, control-panel details and tilting discharge in the shorter supporting clips.
Watch the film ↓What to look for
- Follow how ingredients reach the trough and how the batch is received after mixing.
- Compare twin-shaft action with the texture your filling requires.
- Use the control-panel close-up to frame operator training and guarding questions.
What this footage does not prove
Clips include different mixers and recipes; they are not one continuous batch. A touchscreen view does not prove a complete service package or a validated safety procedure.
Closer views and related demonstrations
Each clip retains its own orientation. Short details support the main demonstration; they are not additional complete production lines.
Sticky rice filling mixer 30s · landscape
Read English transcript
A filling mixer must suit the ingredients, not just the batch size. This Helper demonstration focuses on sticky rice filling preparation. Prepared rice is added to the trough before the other ingredients are combined. The batch receives additional ingredients for the demonstrated filling recipe. Two shafts distribute the mixture through the trough. Time and speed need to be checked against the desired texture. The trough tilts to release the prepared filling. Talk with Helper about your recipe, loading method, and receiving process.
Filling loading & mixing 24s · vertical
Read English transcript
A filling line needs controlled ingredient handling before mixing. This Helper view shows the loading interface. The ingredients enter the trough ready for the selected batch process. The operator uses the touchscreen to access the machine controls. The close view shows the batch in the mixing chamber, with ingredients prepared for blending. Helper can review loading, mixing, discharge, and guarding as one system around your recipe and factory.
Filling mixer discharge 14s · vertical
Read English transcript
This Helper filling mixer demonstration shows the ingredients moving through a twin-shaft trough. The machine is part of a batch process, with settings chosen for the mixture. Tilting releases the batch. Discuss filling preparation with Helper.
Filling ingredient addition 6s · vertical
Unable to play? Open the video or contact HELPER.
Read English transcript
Ingredient loading is part of filling preparation. Match your mixer and recipe with Helper.
Filling mixer overview 10s · vertical
Unable to play? Open the video or contact HELPER.
Read English transcript
See the control panel and trough of a Helper filling mixer. Plan the loading and discharge interfaces around your batch. Contact Helper with your filling recipe.
Filling mixer touchscreen 7s · vertical
Unable to play? Open the video or contact HELPER.
Read English transcript
A close look at the Helper mixer touchscreen. Discuss the control configuration your filling process needs.
Filling batch close-up 7s · vertical
Unable to play? Open the video or contact HELPER.
Read English transcript
This Helper mixer view shows the prepared ingredients in the trough. Match batch handling to your recipe with Helper.
Connect the film to your project
Share your ingredients, finished product, target output, available floor space and the process before and after this machine. HELPER can review the configuration and the scope of testing and operator support with you.
Discuss your project →Related equipment & engineering
Read the main English transcript
The Helper J B four hundred is a non-vacuum twin-shaft mixer for preparing ingredient batches. A loading interface transfers the ingredients into the trough for mixing. The operator controls coordinate the demonstrated batch sequence. The shafts combine the meat and other ingredients for the next processing step. Prepared filling leaves the mixer through the discharge arrangement. Helper can review batch size and handling around your recipe.
About the footage: website previews are frames from the supplied operating videos. Product and food artwork in some opening covers is illustrative, not photographic evidence of the demonstrated output. Filming conditions and configurations vary between clips.