ZKHM-650 Vacuum Dough Mixer: Workshop Details

See how the mixing shaft, paddles and curved arms fit inside the trough. Use the workshop video and close-ups to identify these parts and the controls beside the trough.

Watch the workshop video View the component photos Check product configuration

AI-retouched factory photo

Watch the ZKHM-650 workshop walkthrough

YouTube https://www.youtube.com/watch?v=K6bTl4ATh6k

Helper Machinery · 38 seconds

Look inside the open trough to see the horizontal shaft, flat paddles and curved mixing arms. The clip shows the machine setup for discussing tangyuan and taro ball dough applications. The trough is empty during this workshop inspection.

Use the close-ups below to identify the individual parts and read the operator panel labels.

Identify the shaft, paddles and controls

Select any photo to open a larger view in a new tab. The gallery uses AI-retouched workshop photos. The mixing assembly, operator panel and rear connections also have factory photo links.

ZKHM-650: Left front with lid raised — Left front with lid raised

ZKHM-650: Open trough and complete mixing shaft — **Horizontal mixing shaft**The round shaft spans the trough from one side wall to the other. The center collar joins the mixing elements to the shaft.View factory photo

ZKHM-650: Right shaft end and mounting points — Right shaft end and mounting points

ZKHM-650: Center collar, paddles and curved arms — **Flat paddles and curved arms**The broad metal faces beside the center collar are the paddles. The curved bars extend outward from the collar toward the ends of the trough.

ZKHM-650: Left shaft collar and trough wall — Left shaft collar and trough wall

ZKHM-650: Side housing beside the trough — Side housing beside the trough

ZKHM-650: Operator panel and ZKHM-650 model marking — **Operator panel and emergency stop**The photographed MCGS panel has a screen and labelled buttons for forward and reverse, trough positioning and lid movement. The red emergency stop sits below.View factory photo

ZKHM-650: Control-side overall view — Control-side overall view

ZKHM-650: Rear hoses and fittings — Rear hoses and fittings View factory photo

What to confirm for your line

Mixing assembly: Compare the shaft ends, center collar and mixing elements with the arrangement on the approved drawing for your recipe.
Operator controls: The factory close-up shows an MCGS panel on this photographed machine. Confirm the control package and operating language in the quotation.
Access and connections: Use the front and rear views to discuss lid clearance, service access, utility connections and the receiving position for discharge.

Discuss your ZKHM-650 configuration